Lowrance iFinder cable pinout

GPS connector or cable wiring scheme

UNKNOWN connector
at the bottom of the unit

bottom of the unit Pin	Pin Name	Description
1	ext. power	3.3v externally regulated. DO NOT FEED WITH 12 VOLTS!
2	serial in	RS232 data, connect straight to PC com port
3	serial out	RS232 data, connect straight to PC com port
4	ground	signal ground
5	headphone select	ground this pin to disable internal beeper and send audio out connector instead
6	left audio	for the firmware's mp3/ogg player, of course
7	right audio	and the waypoint voicenote feature, too

The PC-DI7 cable uses four pins, but doesn't bring out the audio connections for simultaneous use as an audio player.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > GPS receivers connectors pinouts listing > Pinout of Lowrance iFinder cable and layout of connector	Document status:	unknown
Contributor: Myself	0 reports
Last updated at Sat Apr 7 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
3411 hits since January 10, 2007