Hardware pinouts information and cables schemes

Sony LANC interface pinout

camera connector or camera cable scheme

bookmark this page

available at the modern SONY camcorders

3 pin stereo plug connector layout

3 pin stereo plug connector
at the cable (2.5 mm jack used)



2.5 mm jack or 5 pin mini-din connectors may be used:

Pin of
jack / minidin
SignalDescription
ground / 5Ground 
R / 1+Vdc+5...8 volt, depending on model and battery used
L / 4LANC 
3SwitchConnect Pin 3 to GND for >140 ms to power on
2CTL 


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Related Links:
Pinouts.ru > Digital cameras interfaces >  Pinout of Sony LANC interface and layout of 3 pin stereo plug connector and 5 pin mini-din connector
Document status: unknown
Source(s) of this and additional information: LANC insight 2 reports
Last updated at Thu May 10 2007. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
15187 hits since March 4, 2005