|
Sony LANC cable pinout |
camera connector or camera cable scheme |
this cable may be used for dump/restore camcorder´s firmware, unlock DV-in, change internal registers in Sony camcorders
 The plug on the left is the 2.5-mm stereo jack that is used for the LanC connection (LANC signal marked by L) on the camcorder, whereas the DB25M connector on the right is a male LPT 25-pin connector and connects to your PC. The cable in between is approx. 3-feet in length and is shielded, whereas the transistor, or rather mosfet, is a common N-channel mosfet rated at 60-volts, the BS-170. This cable is designed to work with EPP or ECP printer ports only and will not work with SPP or Normal settings. Some notebooks might not be able to supply enough power to their printer port to use the interface cable successfully. Programs designed to work with this cable are: RM95 (makes the firmware dump), DVin Lite (modify the camcorder´s registers), LANCTERM . Refer to source link for explanations.
|  25 pin D-SUB male connector | ||
Pinouts.ru > Digital cameras interfaces > Pinout of Sony LANC cable and layout of 3 pin stereo plug connector and 25 pin D-SUB male connector |
correct | |
| Source(s) of this and additional information: hardwareanalysis.com | 1 reports | |
| Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. | Is this document correct or incorrect? What is your opinion? | |
