Dakota digital camera USB

��

10 pin PALM special connector
at the camera

Pin 1 is closest to the shutter release button, and pin 10 is closest to the battery door at the bottom. The connector is the same type used on the older Palm Pilots e.g. Palm III, VIII Hotsync Cable (with some peeling).

Pin	Signal Name	Description
1		goes to R57 (unpopulated), to U2.79. Use unknown.
2	Ground
3		R18 (4.7K) - U2.30 (P31) & delete button. Also through R68 (unpopulated) to JP1.2
4		R2 (unpopulated) - pin 6 of SST program memory FLASH. This is address bit 17, which isn't used by the size FLASH memory installed.
5		R5 (1K) - U2.33 (P13). Use unknown.
6	USB +5V power	Connects to red wire.
7	USB Ground	Connects to black wire (you can also use pin 2 or 10).
8	USB Data +	Connects to green wire.
9	USB Data -	Connects to white wire.
10	Ground

�� , �� . ��  ��!
�� (�� ), �� (�� ). �� .

Pinouts.ru > �� > �� Dakota digital camera USB �� 10 pin PALM special	�� :	��
��(�) � �� : Disposable Digital Camera Interfacing, < a href="http://cexx.org/dakota/">cexx.org/dakota	0 ��
Last updated at Sun May 13 2007 (�� )	�� ?

[�� ] [�� ] [�� ]

Dakota digital camera USB

���������� �������

��