LSC CodeLink cable pinout

connector or cable wiring

5 pin XLR male connector
to the LSC Lighting Product

LSC Lighting Product Pin name	LSC Lighting Product Pin	PC Pin
Gnd	1+ Case	5
Tx	4	3
Rx	5	2

It is also possible to make the cable using a DB25 for older style computers. This requires;

Function  5pin XLR Male(inline)   DB9 Female(inline)	DB25 Female(inline)
Gnd	      1 + Case               	5	               1+7
Tx	        4	                3                	2
Rx	        5	                2                	3
Notes:
The connector body of the DMX connector must be nickel-plated, which is conductive, and not the black style, which is not.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

9 pin D-SUB female connector
to the computer

Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of LSC CodeLink cable and layout of 5 pin XLR male connector and 9 pin D-SUB female connector	Document status:	correct
	2 reports
Last updated at Sun Feb 19 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
5836 hits since August 13, 2005