Allied Telesyn/Network iQ1000 router serial port cable pinout

connector or cable wiring

8 pin RJ45 (8P8C) male connector
to the router

Router Port 0 Pin	Direction	PC or terminal serial port Pin	PC or terminal serial port Pin name	Description
1	-?-	9	RI	Ring Indicator
2		4	DTR	Data Terminal Ready
3		1	CD	Carrier Detect
4		5	GND	Signal Ground
5		3	TXD	Transmit Data
6	-?-	2	RXD	Receive Data
7	-?-	7	RTS	Request to Send
8	-?-	8	CTS	Clear to Send

DSR is not connected. This pinout copied from a known working cable.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

9 pin D-SUB female connector
to the computer

Pinouts.ru > GPS, UPS, Switches and other devices cables and adapters schematics > Pinout of Allied Telesyn/Network iQ1000 router serial port cable and layout of 8 pin RJ45 (8P8C) male connector and 9 pin D-SUB female connector	Document status:	unknown
Contributor: Lesley Walker	0 reports
Last updated at Thu Jul 7 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
6134 hits since July 1, 2005