Simatic S7-200 PLC pinout

connector wiring scheme

Pin Name	Pin Number	Description
1	GND	Ground
2	GND	Ground
3	SDA	I2C Bus
4	SCL	I2C Bus
5	+5V	Internal Power Supply
6	+5V	Internal Power Supply

Can be used to make a memory dump of the internal on-board memory of all SIMATIC CPUs 22x with the appropiate software and hardware

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Some peripheral devices pinouts > Pinout of Simatic S7-200 PLC and layout of connector	Document status:	correct
	1 reports
Last updated at Sun Jun 25 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
4543 hits since October 27, 2006