Motorola Symbol CS1504 barcode scanner jack pinout

connector wiring scheme

5 pin mini-USB jack connector
at the left side

left side Pin	Pin Name	Description
1	TXD	Transmit Data (RS232C DE-9 pin 3)
2	DTR	Data Terminal Ready (RS232C DE-9 pin 4)
3	CTS	Clear To Send (RS232C DE-9 pin 8)
x	RXD	Receive Data (RS232C DE-9 pin 2)
4	GND	System Ground (RS232C DE-9 pin 5)

The standard 25-44301-01 scanner cable has the same connector as mini-USB on the scanner end, and a RS-232C DE-9 connector on the other. To connect the scanner via USB, a separate DB9 to USB adapter 50-16000-386 must be used in combination with this cable.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Some peripheral devices pinouts > Pinout of Motorola Symbol CS1504 barcode scanner jack and layout of 5 pin mini-USB jack connector	Document status:	unknown
Contributor: Simon Flummox	0 reports
Last updated at Sat Oct 13 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
1015 hits since October 13, 2007