Hardware pinouts information and cables schemes

Apple LaserWriter Serial pinout

connector wiring scheme

bookmark this page

25 pin D-SUB female connector layout

25 pin D-SUB female connector



Pin Name Dir Description
1GND---Ground
2TXD--->Transmit Data
3RXD-<--Receive Data
4RTS-->Request To Send
5CTS<--Clear To Send
6DSR<--Data Set Ready
7GND---Ground
8DCD-->Data Carrier Detect
20DTR--->Data Terminal Ready
22RING<--?

Note: Direction is Printer relative Computer.


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
25 pin D-SUB male connector diagram

25 pin D-SUB male connector

Pinouts.ru > Some peripheral devices pinouts >  Pinout of Apple LaserWriter Serial and layout of 25 pin D-SUB female connector and 25 pin D-SUB male connector
Document status: unknown
Source(s) of this and additional information: Technote HW19: Pinouts at Apple Technical Notes, from Hardware Book 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7424 hits since March 4, 2005