Hardware pinouts information and cables schemes

Apple LaserWriter AppleTalk pinout

connector wiring scheme

bookmark this page



Pin Name Dir Description
1GND---Ground
2n/c Not connected
3GND---Ground
4TXD+-->Transmit Data +
5TXD--->Transmit Data -
6n/c Not connected
7RXCLK-->TRxC of Zilog 8530
8RXD+<--Receive Data +
9RXD-<--Receive Data -

Note: Direction is Printer relative Computer.


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Some peripheral devices pinouts >  Pinout of Apple LaserWriter AppleTalk and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector
Document status: unknown
Source(s) of this and additional information: Technote HW19: Pinouts at Apple Technical Notes, from Hardware Book 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7069 hits since March 4, 2005