|
Universal (generic) serial data / flash mobile phone cable schematic pinout |
cellphone cable and connector wiring scheme |
This is a simple and common cable for cell phones without USB support. Tested with Ericsson, Siemens, Panasonic, Sagem, Sony, Alcatel, Motorola cellular phones. Allows flashing.
 This scheme is some kind of RS-232 Driver/Receiver. Power is driven from COM-port. Almost all digital devices we use require TTL or CMOS logic levels. That"s why the first step when trying to connect the device to RS-232 port is transformation of RS-232 levels ack into 0 and 5 Volts. This is done by RS-232 Level Converters, like a Max 232. There are also many variations of these devices. Other devices are available which use smaller capacitors and even some with built-in capacitors. (Note : Some MAX-232"s can use 1 micro farad Capacitors). However the MAX-232 is the most common, and thus this RS-232 Level Converter will be used in our example. This cable tested with: Alcatel OT, OneTouch db; Ericsson T10, T18s, T28s, A1018s, 888; Panasonic G450, G500, G520, G600, GD-70, GD-90; Sagem 612, 615, 715, 725, 730, 750, 820; Sony CMD-C5. Should work with most other phones except Nokia, Bosch.  You can find a pinout for your model in the appropriate section of this website. | UNKNOWN connector to the cellular phone | |
Pinouts.ru > Nokia, Samsung, Motorola and other mobile phones cables schemes listing > Pinout of Universal (generic) serial data / flash mobile phone cable schematic and layout of 9 pin D-SUB male connector |
correct | |
| 5 reports | ||
| Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. | Is this document correct or incorrect? What is your opinion? | |
