Hardware pinouts information and cables schemes

Sony CMD 1000 cell phone pinout

connector or cable wiring scheme

bookmark this page

full pinout

14 pin Sony CMD cell phone special connector layout

14 pin Sony CMD cell phone special connector
at the cellular phone



Pin Description
1Power (+ 9V)
2Battery charge
3Handsfree sos
4Handsfree extern (10K resistor to +9 to enable handsfree functions)
5TXE
6RXE
7Ignition (10K resistor to +9 to illuminate the display continiously)
8Antenna extern (10K resistor to ground to enable external microphone and antenna)
9Audio 1
10Audio 2 (loudspeaker amplifier output)
11Microphone (use electrect microfoon and 46 db preamp.)
12Audio ground (do not connect to 13 and 14 )
13Ground (supply)
14Ground (supply)


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > O-W (Panasonic, Samsung,...) cell phones connectors pinouts listing >  Pinout of Sony CMD 1000 cell phone and layout of 14 pin Sony CMD cell phone special connector
Document status: unknown
Source(s) of this and additional information: Sony CMD1000 pinout at Technick.net, from Hardware Book 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
8935 hits since March 4, 2005