Siemens A35, A36, A40, C25, C35, C45, M35, M35i, M50, ME45, MT50, S25, S35, S45, SL-42, SL45, 3118 cell phones pinout

connector or cable wiring scheme

12 pin Siemens Lumberg cell phone special connector layout

12 pin Siemens Lumberg cell phone special connector
at the mobile phone

Pin	Name	Dir	Description
1	GND	-	Ground
2	SELF-SERVICE	in/out	Recognition/control battery charger
3	LOAD	in	Charging voltage
4	BATTERY	out	Battery (S25 only)
5	DATA OUT (TX)	out	Data sent
6	DATA IN (RX)	in	Data received
7	Z_CLK	-	Clock line for accessory bus. Use as DCD In data operation
8	Z_DATA	-	Data line for accessory bus. Use as CTS in data operation
9	MICG	-	Ground for microphone
10	MIC	in	Microphone input
11	AUD	out	Loudspeaker
12	AUDG	-	Ground for external speaker

Siemens sl42, sl45 and sl45i and some others should have audio L, R and Gnd somewhere in these 12 pins (for their stereo mp3 player). Suggested that audio L is pin 2, audio R is pin 11 and audio Gnd is pin 12.

Pinouts.ru > O-W (Panasonic, Samsung,...) cell phones connectors pinouts listing > Pinout of Siemens A35, A36, A40, C25, C35, C45, M35, M35i, M50, ME45, MT50, S25, S35, S45, SL-42, SL45, 3118 cell phones and layout of 12 pin Siemens Lumberg cell phone special connector	Document status:	correct
Source(s) of this and additional information: Siemens C25/S25 pinout at Technick.net	12 reports
Last updated at Tue Nov 7 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
61153 hits since March 4, 2005