Hardware pinouts information and cables schemes

Samsung i700 interface port pinout

connector or cable wiring scheme

bookmark this page

19 pin Samsung PDA special connector layout

19 pin Samsung PDA special connector
at the device, looking at the i700 connector plug pins with the retainer hooks pointing up



PinSignalDescription
3GNDshorted by R=44.5KOhm to pin 18 when keyboard attached
4Rxalso Tx for keyboard
5Tx 
8Ri 
9CTS 
10DTR 
11DSR 
16Vccpower +5V, VDD for keyboard, +4.2V charging by i700 12V charger
17GND 
15 +1.5V charging by i700 12V charger
18 +0.66V charging by i700 12V charger
19 +6V charging by i700 12V charger

i700 Audio Jack Pinouts
tip = mike
ring = left audio
base = ground
outer ring = right audio

Samsung I700 charger (should show charger icon when connected). NOT tested!
2 - R1=120k to pin 3
3 - GND
4 - +V (4.3V-4.6V, not more)
5 - R2=2.2k to pin 4


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > O-W (Panasonic, Samsung,...) cell phones connectors pinouts listing >  Pinout of Samsung i700 interface port and layout of 19 pin Samsung PDA special connector
Document status: unknown
Source(s) of this and additional information: Serial Secrets for PocketPC"s 2 reports
Last updated at Tue Nov 7 2006. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
9512 hits since May 20, 2005