Hardware pinouts information and cables schemes

Pantech C300, G300, G600, G700, G800, G900, GB100, GB200, GB300, GF200, GF500, PG1200, PG1400, PG1500, PG3000, PG3200, PG3500, PG3600, PG6100, PG8000 cell phones interface port pinout

connector or cable wiring scheme

bookmark this page

full pinout. Used in all Pantech cell phones?



Pin Function
1+Vcharge
2+Vcharge
3CTS / IO / USC5
4RTS / CLK / USC4
5?FS / RI / USC3
6+Vbat
7+Vbat
8?ACCIDENT / USB Data+
9?FS / RI / USC6
10RX / CTS / GPIO_1
11TX / RTS / GPIO_3
12TXD / TX / USC2
13POWERON. Connect to GND for autostart phone.
14?ACCDETECT / USB Data-
15RXD / RX / USC1
16CLK / USC0
17JTAGEN - For activation connect to Vbat.
18TDI / DAI1 / GPIO20
19TDO / DAI0 / GPIO21
20TMS / DAIRESET / GPIO19
21TCK / HSLDO0 / GPIO18
22GND
23GND
24GND

Newer Pantech cell phones may be connected to computer with simple USB cable. +Vcharge to PC USB Vcc, pin 8 to USB Data+, Pin 14 to USB Data-, GND to USB GND. Should work with Pantech PG-6100 and may be some others

Pins 3,4,6,7,11,12,15,16,22,23,24 are used in serial data-cable
Pins 6,7, 10,11,12,15,16,22,23,24 are used for JTAG (hi level specification by Analog Device)

Related Links:
Pinouts.ru > O-W (Panasonic, Samsung,...) cell phones connectors pinouts listing >  Pinout of Pantech C300, G300, G600, G700, G800, G900, GB100, GB200, GB300, GF200, GF500, PG1200, PG1400, PG1500, PG3000, PG3200, PG3500, PG3600, PG6100, PG8000 cell phones interface port and layout of 24 pin Pantech cell phone special connector
Document status: correct
Source(s) of this and additional information: Pantech pinout 5 reports
Last updated at Sat Apr 7 2007. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
21151 hits since March 4, 2005