Nokia 6610 Color LCD Connector pinout

connector or cable wiring scheme

Pin	Pin Name	Description
1	VDD 3.3 V	LCD Power
2	Reset	?
3	SDATA	Serial Data (Synchronous data - can use SPI port on Microchip PIC MCU's)
4	SCLK	Serial Clock
5	CS	Chip Select
6	VLCD 3.3V	LCD Power
7	NC	Not connected
8	GND	LCD Power
9	LED- (0V)	Backlight LED Cathode
10	LED+ (6V)	Backlight LED Anode

The connector on the LCD Module used in Nokia 6610 phones. Also applicable to Chinese LCD remakes sold as replacement parts (on SparkFun website http://www.sparkfun.com/commerce/product_info.php?products_id=569 etc.) This 10 pin connector is used on both types of Color LCDs - the green PCB and brown PCB. View the pictures of the connector as well as how to solder the contacts yourself. http://robinbigsmile.spaces.live.com/photos/cns!1C97694BF9FB109B!129/

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Nokia cell phones ports pinouts listing > Pinout of Nokia 6610 Color LCD Connector and layout of connector	Document status:	unknown
Contributor: Robin	0 reports
Last updated at Sun Nov 4 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
1049 hits since November 5, 2007