Escort Solo S2 / Passport Radar Detector pinout

connector or cable wiring scheme

6 pin RJ12 (6P6C) female connector layout

6 pin RJ12 (6P6C) female connector
at the Radar Detector

Radar Detector Pin Name	Radar Detector Pin Number	Direction	Wires Pin Number	Wires Pin Name	Description
LED	1	-->	1	LED	12VDC In -> 470-Ohn -> Power LED-> Detector -> Alert LED -> 2N3904 -> 680k -> Ground & 10k ->Pin 2
12+	2	<--	2	12+	12VDC Positive
GND	3	<--	3	GND	Ground
Mute	4	<--	4	Mute	Remote Mute - Use N/O Switch - Terminate after switch with 470-Ohm

There is a report that +12v is at pin 4.

Comment from Paul Gardner

I think where the power lines are all depends on what you are usind as the cord if you are using a standard telephone cable (rj11) with the 4 connectors I think you have the correct diagram. However if you are usind a CAT4 cable then you are still looking at the middle to wires for the power and groung but now they are pins 3 and 4

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Cars and bikes interfaces > Pinout of Escort Solo S2 / Passport Radar Detector and layout of 6 pin RJ12 (6P6C) female connector	Document status:	unknown
Contributor: Dennis	1 reports
Last updated at Sun Nov 25 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
4010 hits since February 27, 2007