Ðàñïèíîâêè êîìïüþòåðíûõ èíòåðôåéñîâ

Escort Solo S2 / Passport Radar Detector

���������� �������

��������� ����� � ��������

Cable for 12VDC, Remote Mute



Radar Detector Pin
Name
Radar Detector Pin
Number
DirectionWires Pin
Number
Wires Pin
Name
Description
LED 1 --> 1 LED 12VDC In -> 470-Ohn -> Power LED-> Detector -> Alert LED -> 2N3904 -> 680k -> Ground & 10k ->Pin 2
12+ 2 <-- 2 12+ 12VDC Positive
GND 3 <-- 3 GND Ground
Mute 4 <-- 4 Mute Remote Mute - Use N/O Switch - Terminate after switch with 470-Ohm

There is a report that +12v is at pin 4.

Comment from Paul Gardner

I think where the power lines are all depends on what you are usind as the cord if you are using a standard telephone cable (rj11) with the 4 connectors I think you have the correct diagram. However if you are usind a CAT4 cable then you are still looking at the middle to wires for the power and groung but now they are pins 3 and 4


��� ���������� ������ ���� ����������, �� ������ ������ ��������. �� ������ ������!
�� ������ ����������� ������������ ��������� (������ ���� ������������� �������), ��� �������� �� ������ � ��������� (������ ����� ���� ������� ����� �� ������). ���� ������ ����� ������ ��� ������� ������� ���������.
Pinouts.ru > ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ����������� >  ���������� Escort Solo S2 / Passport Radar Detector ������������� ������ 6 pin RJ12 (6P6C) female
������ ���������: �� ��������������

��: Dennis
1 �������
���� �������� �������� ������ ��� �� ����������?
[�������� �� ������] [����� � ����������] [�������� ��������]
�������� ��������� Copyright © 2000-2007 by pinouts.ru team.
�� ��������� ������������� ������ ���������� ���������, �� ��������������� �� ���������� ���� ���������� � ����������� ������������ ����� �� ���.
������� ����� ���� �������� �� ������ ������������� � ������ ���������� ��� �������������� ������ ������ �� ���� �������� ��� ���������������� �������� ����������.
4010 hits since February 27, 2007