============================================================================= AST RESEARCH, INC. TECHNICAL BULLETIN #0767 07-17-92 ============================================================================= ADVANTAGE/BRAVO SYSTEMS AND AST/WINDOWS 3.1 LOGO SCREEN Some AST Advantage and Bravo systems are shipped from the factory with Microsoft Windows 3.1 pre-installed on the hard drive. The initial logo screen which is displayed when Windows is started is a special logo, which is a combination Microsoft and AST banner. When the Windows SETUP program is used to change the default display driver from "VGA" to another type of display driver, the "dual" logo is overwritten by the standard Microsoft-only logo. To restore the original "dual" logo, perform the following steps, first making sure that Windows is not loaded: 1. From the DOS prompt, change directories to "n:\WINDOWS\SYSTEM", where "n" is the drive where Windows is installed. 2. Using the DOS COPY command, copy the file ASTWLGO4.RLE to VGALOGO.RLE. 3. Change directories to n:\WINDOWS. 4. Run SETUP and select DISPLAY from the "System Information" list. 5. Use the arrow keys to select VGA. 6. Accept this configuration. 7. Choose "use current driver" when prompted by SETUP, and exit SETUP. The next time Windows is started, the logo screen should be as it was shipped from the factory.